CUBIFY CUBE Y Axis plate

thingiverse

I purchased a Cubify cube from eBay, but it lacked a print plate. So I designed one, printed it, and tested it with PETG. It worked EXCELLENTLY. I shipped it off to have it milled from 3mm aluminum plate, and I was very much impressed. The default hardware from the magnetic mount is used. The bed leveling is done with a 4.5mm melamine sheet cut to 6x6 inches with holes drilled on the outer edge to match with the heated bed from Printrbot (which works WONDERFULLY for this application). A few springs and some nuts and bolts are added for the leveling system, and then a piece of glass from the local shop is placed on the bed as a print surface. This makes for a GREAT setup. The glass is 5x6 inches thick and 3/8 inches thick. Print Settings Notes: The STL can be printed and used as is and is very solid when done in PETG with 50% infill. This was primarily made to test and then put into production to be milled, but it should only be used to test until you get yours milled out.