Cubicle Hooks, Hangers and Magnet Holders for Haworth Compose cubicles (with STEP file)

thingiverse

This is a collection of innovative cube hooks, hangers, and magnet holders inspired by Maverickm1's Cubicle-hook. They are designed to seamlessly clip over the top or side plates of a cubicle with a precise cross section of approximately 77mm x 2.6mm. I have thoroughly tested them and they securely snap onto my cubicle's top plate, yet effortlessly detach. Sorry for not having any photos of them installed, but these designs are specifically tailored to work with <strong>Haworth Compose</strong> cubicles, featuring thin top and side plates without overhangs on the edges. The precise profile of the top plate on the cubicles they are designed to fit is approximately 77mm x 2.6mm, essentially a rectangle with those exact dimensions. These innovative designs have been extensively tested and function as intended. <h1>Several exciting items are posted here:</h1> <strong>Coat hook:</strong> Cube-Clips-1g-hook.stl Cube-Clips-1g-hook-thin.stl (a sleeker alternative) <strong>Magnet hangers (three types using 12x3mm Neodymium magnets):</strong> These designs utilize four magnets (two stacked in each hole): Cube-Clips-1B-Magnets-DOUBLE.stl Cube-Clips-1B-Magnets-DOUBLE-TALL.stl This design uses two magnets: Cube-Clips-1B-Magnets.stl <strong>This is a clip with a button featuring a 9mm small diameter, designed to fit through a grommet or hold various items:</strong> Cube-Clips-1H-Poster-Clip.stl Cube-Clips-1H-Poster-Clip-Button.stl Cube-Clips-1A-Poster-Clip-Button-Whiteboard.stl (a smaller 12mm head button) <strong>This is a flag holder with a hole of approximately 9mm diameter, featuring three 1mm bumps to enhance grip. There is no bottom; it's just a through hole. I may make minor updates to this design in the future.</strong> Cube-Clips-1K-flag-holder.stl <strong>Lastly, this item is a simple low-profile hook designed for hanging lightweight items such as whiteboards:</strong> Cube-Clips-1L-WB-Hanger.stl Cube-Clips-1M-WB-Hanger-2.stl (a wider version of the whiteboard hook with a narrower point) I also posted a remix of a headphone hanger using Qoupd's "Headphone Holder to be mounted with one screw" (https://www.thingiverse.com/thing:3840789), which is a remix of polxuriach's "Headphone Holder" (https://www.thingiverse.com/thing:180851). You can find that here: https://www.thingiverse.com/thing:4129244 These models are not oriented for printing and I printed them at 0.2mm resolution. STEP files are included for easy remixing. If you create one and like it, please post a make; if you have a comment or suggestion to improve it, post a comment and I'll do my best to enhance it.