Cubicle Hooks, Hangers and Magnet Holders for Haworth Compose cubicles (with STEP file)

prusaprinters

<p>This is a collection of cube hooks, hangers and magnet holders which were inspired by Mavericm1's Cubicle-hook. They are designed to clip over the top or side plates of a cubicle with a cross section of approx 77mm x 2.6mm. I have tested them and they snap on the top plate of my cubicle pretty firmly, but are easy to remove.</p> <p>Sorry no pics of them installed, but these are designed to be used with<strong>Haworth Compose</strong> cubicles, which have a thin top and side plates that do not have overhangs on the edges. The profile of the top plate on the cubicles these are designed to fit is approx 77mm x 2.6mm , so basically a rectangle with those dimensions.</p> <p>These have all been tested and work as intended.</p> <h3> There are several things posted here:</h3> <p><strong>Coat hook:</strong></p> <p>Cube-Clips-1g-hook.stl<br/> Cube-Clips-1g-hook-thin.stl (just a thinner version)</p> <p><strong>Magnet hangers (3 types which use 12x3mm Neodymium magnets):</strong></p> <p>These uses 4 magnets (2x2 stacked in each hole):</p> <p>Cube-Clips-1B-Magnets-DOUBLE.stl<br/> Cube-Clips-1B-Magnets-DOUBLE-TALL.stl</p> <p>This uses 2 magnets:<br/> Cube-Clips-1B-Magnets.stl</p> <p><strong>This is a clip with a button that has a 9mm small diameter, designed to fit though a grommet but could also be used for holding various items:</strong></p> <p>Cube-Clips-1H-Poster-Clip.stl<br/> Cube-Clips-1H-Poster-Clip-Button.stl<br/> Cube-Clips-1A-Poster-Clip-Button-Whiteboard.stl (smaller 12mm head button)</p> <p><strong>This is a flag holder which has a hole of approx 9mm diameter with three 1mm bumps arranged to help grip the flag better. There is no bottom on this, it is just a through hole. I may update this one further, but changes will be minor.</strong></p> <p>Cube-Clips-1K-flag-holder.stl</p> <p><strong>Finally, this thing is a simple low profile hook designed to allow hanging a white board or other lightweight item:</strong></p> <p>Cube-Clips-1L-WB-Hanger.stl<br/> Cube-Clips-1M-WB-Hanger-2.stl (wider version of the whiteboard hook with a narrower point)</p> <p>I posted a remix of a headphone hanger which uses Qoupd's "Headphone Holder to be mounted with one screw" (<a href="https://www.thingiverse.com/thing:3840789">https://www.thingiverse.com/thing:3840789</a>) which is a remix of polxuriach's "Headphone Holder" (<a href="https://www.thingiverse.com/thing:180851">https://www.thingiverse.com/thing:180851</a>). You can find that here:</p> <p><a href="https://www.thingiverse.com/thing:4129244">https://www.thingiverse.com/thing:4129244</a></p> <p>These models are not oriented for printing and I printed them at 0.2mm resolution. STEP files are included for easy remixing.</p> <p>If you make one and like it please post a make, if you have a comment or suggestion to improve it post a comment and I will see what I can do to make it better.</p> Category: Office