Cubby for Ford FITS (Ford Maverick)
prusaprinters
There is a small positioning notch on the bottom of the cubby. This will index itself in the hole in the cubby. I recommend using some adhesive hook-and-loop placed at the rear to keep the assembly in place.----There are FOUR variants:Standard: Has an open bottom and an indexing tab. This MUST be printed with supports.Open Bottom and No Indexing Tab: No supports needed, open bottom. MUST use hook-and-loop or adhesive to secure.Solid Botton and Indexing Tab: Has a solid bottom and an indexing tab. This MUST be printed with supports.Solid Botton and NO Indexing Tab: No supports needed, solid bottom. MUST use hook-and-loop or adhesive to secure.----This was developed for The Drive's Great Ford Maverick 3D Print-Off where auto journalists Rob Stumpf (@RobDrivesCars) and Peter Holderith (@_baldtires) spent two weeks building accessories for the Ford Maverick's FITS system.You can read more about it here: https://www.thedrive.com/tech/its-time-to-vote-on-the-drives-best-ford-maverick-3d-printed-accessoryhttps://www.thedrive.com/tech/i-3d-printed-a-heated-and-cooled-cupholder-for-the-base-ford-maverickhttps://www.thedrive.com/news/our-first-3d-printed-ford-maverick-accessories-are-taking-shapehttps://www.thedrive.com/news/were-building-crazy-3d-printed-ford-maverick-accessories-and-we-want-your-ideas
With this file you will be able to print Cubby for Ford FITS (Ford Maverick) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Cubby for Ford FITS (Ford Maverick).