CS Church, N scale

cults3d

Derived from the CS church in H0, I present its version in N scale. This is a church building, based on the beautiful church in the town of Cerro Sombrero. It consists of the structure, the access, windows and doors, ornaments, roofs and a building of priestly offices connected by a corridor. The real building has panels on its roofs which are reproduced to scale in this model. The scale is 1:150 which makes it suitable for N scale electric train models. It consists of several STL files compressed into a single ZIP file. Dimensions: Base dimensions: 24.4 x 18 cm. Building dimensions: 23.2 x 17.4 x 9.2 cm. Main features of the model: The building is printable on any type of printer as versions have been made for both 20x20 and higher volume, and continuous printers. Two church bells are included which go under the "V" bell tower at the entrance. Version of the complete church structure and offices plus plates. Print according to taste or type of printer. Easy to assemble as it is only necessary to look at the renderings. There are joints connecting certain elements, such as the main cross to the structure or to form the bases. STL files categorized and sorted in folders where the files of each version are sorted. There is one folder that has all shared parts for all versions. Supports: configured to print without supports in general but in the main structure, it is recommended to occupy supports despite being in plate format. It will also require support for the base of the rear cross and some other parts (check before printing). It is recommended to print in PLA material and in the best possible quality (0.1 mm). Recommended colors: structure in red, church door in light blue, doors in brown, ceilings in white (the church ceiling can also be light blue), pavements and stairs in gray, ornaments in white. Optimized for printers of any type. While the holes are designed for the correct insertion of windows and doors equally the highest quality should be used to print the latter, and it may be necessary to grind or polish the holes if necessary. Glue should be used to attach windows, doors, base and roof, preferably UHU.