Cross Stitch Needle Holder Clip

prusaprinters

<p>This needle holder clip requires a small disk magnet of the following size :</p><ul><li>Disk magnet : 9.5mm diameter, 3mm thick</li></ul><p>The clip is designed to clip onto one of the ¾ inch (19mm) dowels of a cross-stitch frame. A small magnet is pressed into the top of the clip to hold a needle (see photos).</p><p>&nbsp;</p><h4>Print Instructions</h4><p>Print in PLA using the gcode or 3mf file provided. I printed it laying on it's side on a smooth bed with a bit of glue stick. In general&nbsp;</p><ul><li>0.3mm layer height</li><li>0% fill</li><li>no brim</li></ul><p>After printing, press the disk magnet into the recess in the top of the clip. It will be a tight fit, so I suggest using a pair of needle nose pliers to help with the pressing (not too hard or the magnet will crack).</p><p>The assembled clip simply clamps onto the frame dowel. It can be easily removed or relaocted on the frame.</p><p>&nbsp;</p><p>&nbsp;</p><h4>CAD</h4><p>The OnShape 3D CAD files for this are here :</p><p>https://cad.onshape.com/documents/b72a1227781cf1f9a7775d47/w/09e9319adee224bdd74e6158/e/3acc545ba22e06b404f4fb8f</p>