Crocodile Skink with 7 hidden 6x3mm magnets (1 pause) and 2nd pause for manual filament change

prusaprinters

<p>I loved the original and wanted magnets that were hidden and a pause to add some more colour to the print... &nbsp;</p><p>I printed in Bronze silk then Rainbow silk to get the colour.</p><p>1st pause in the print is at the top of the magnets. &nbsp;At the pause, insert the 7 magnets in the holes and restart the print.</p><p>2nd pause is for the manual filament change to add some colour to the spines and head.</p><p>I also added a file for eyes in TPU. &nbsp;I used red then black after the pause in the G-code. &nbsp;Once printed, line the “pupils” up and pop them in.</p><p>…and a test file for the magnet sizing - one of the arms - just to make sure your brand of magnet fits before embarking on a long print. &nbsp;I got mine from the big 'A'; their 6x3mm 100 pack.</p><p>This was printed on a MK3S+ .4mm nozzle, .15mm layers and no brims or supports at the default 215/210C PLA nozzle and 60C bed. 235C TPU nozzle and 55C bed. Don't forget to put some glue down on a smooth bed as a release agent for the TPU…</p><p>Final note: I did start the filament change way early on the pictured model… …because reasons.</p>