Crocodile Skink with 7 hidden 6x3mm magnets (1 pause) and 2nd pause for manual filament change

prusaprinters

I loved the original and wanted magnets that were hidden and a pause to add some more colour to the print...  I printed in Bronze silk then Rainbow silk to get the colour.1st pause in the print is at the top of the magnets.  At the pause, insert the 7 magnets in the holes and restart the print.2nd pause is for the manual filament change to add some colour to the spines and head.I also added a file for eyes in TPU.  I used red then black after the pause in the G-code.  Once printed, line the “pupils” up and pop them in.…and a test file for the magnet sizing - one of the arms - just to make sure your brand of magnet fits before embarking on a long print.  I got mine from the big 'A'; their 6x3mm 100 pack.This was printed on a MK3S+ .4mm nozzle, .15mm layers and no brims or supports at the default 215/210C PLA nozzle and 60C bed. 235C TPU nozzle and 55C bed. Don't forget to put some glue down on a smooth bed as a release agent for the TPU…Final note: I did start the filament change way early on the pictured model… …because reasons.