Crocodile

cults3d

Crocodile, from the comic strip by Stephan Pastis, is a main antagonist and villain in the strip. As an inept neighbor of Zebra, Crocodile is frequently involved in various failed attempts to kill and eat Zebra. No supports are required when printing this model. If you have the right filament colors, no painting is needed either. The completed model stands 135mm tall after assembly and is proportionate to the Pig and Crocodile models from the comic strip that I've also posted. Enjoy building your own Crocodile! Printer: FlashForge Creator X Rafts: Doesn't Matter Supports: No Resolution: .2mm Infill: 10% Notes: See below for helpful printing and assembly tips. Building the Model Colors: * Black: eye_blacks, arm_left, arm_right, legs, etc. * White: eye_whites, etc. * Dark Green: body_back, body_front, etc. * Light Green: belly, etc. * Yellow: base (optional), etc. * Any Color: body_bumps Printing and Assembly Tips 1. No supports are required. 2. I used a brim on some pieces; use your discretion based on your preference: * arm_left and arm_right are tall curved pieces with small bases. 3. For the best-looking model, clean your brims thoroughly. All the pieces fit nicely together, as long as the brims/squish are cleaned up, including the holes for body_bumps. Assembly Tips * The diagram below will help you assemble the model and is quite straightforward. * The model should be glued together. * Take care to ensure that the first layer squish and any added brim is completely cleaned off. * Rotate eye_whites pieces to fit properly; the larger part of white goes on top. * Eye_blacks pieces are interchangeable, with no left/right differences. * The model stands nicely on its own but comes with a base for extra stability if needed.