Cribbage Board

prusaprinters

<p>Fully 3D printable cribbage board. Includes hole with screw-on cover for peg storage (fits six pegs). See below for specific printing instructions...</p> <h3> Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Prusa</p> <p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>i3 MK3</p></div><strong>Rafts:</strong></p> <p>Yes</p> <p><p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div><strong>Infill:</strong></p> <p>varies</p> <p><strong>Filament:</strong> PLA <br/> <p class="detail-setting notes"><strong>Notes: </strong> </p><div><p>Board can be printed flat side (base) down with no supports and no raft/brim - to minimize use of filament, 10 to 15% infill is suitable. Layers of .2 to .28 mm should work, larger and you may risk the peg hole threads not printing properly. To avoid a disfigured print, pegs are best printed two or three at a time so that the filament has time to harden slightly before the next layer is printed. They should be printed with a raft or brim, tapered end down. About 0.15 mm layers result in the nicest looking pegs. Finally, the screw should be printed vertically, with the sphere at the top, with a raft or brim and also with about 0.15 mm layers.</p></div></p> </p></p> Category: Games