Creality UW-01 Wash Tub Stirring Mount

thingiverse

This is a replacement mount for the Stirring Fan located inside the wash tub. They do not sell a replacement part if you break the spindle. The plate now fits correctly on the posts, but with the settings I used the cylinder in the center was too large to engage the collet for the mounting screw, and the collet floated freely in the cylinder. I measured the wall thickness and it was only .8mm not the designed 1.2mm, I have adjusted my settings in cura and am currently printing Mk3 with no changes to the STL. Okay, so after the 3rd print, the wall thickness for the shaft was still only .8mm because it was a snug but not tight fit, I used some gap filling cyanoacrylate, I also had to add a washer underneath each rubber boot that holds the protective cage on to maintain the space with the fan. If you make this please let me know how yours turns out. When this first one breaks down (which it will since it's only PLA+ and will be operating in a wet environment) I may still make some additional refinements, but for today I think it's good. Thanks JP