Creality Spider HotEnd Adapter for CR6-SE

thingiverse

CR6-SE Hotend end adapter for Creality Spider HotEnd. Part A: HotEnd Adaptor - Primary support for the HotEnd. Important: The spider's default pneumatic coupler will not fit the CR-6 SE top mount - you will need to replace this with a PC4-M10 coupler that is cheap and easy to find on Amazon. With coupler replaced - recommend screwing the hotend into Part A first before attaching to printer mount, also try testing the other screw holes with their respective screws before mounting - this will ensure your print is correct and will "loosen" the screw holes for attachment (nothing worse than 1/2 mounted and a screw won't 'catch' into the hole). Part B is attached once Part A is mounted. Note that Part A replaces the plastic fan seperator (Horse-shoe looking part that fits between fan and heatsink - so do not reattach this as the metal casing will no longer fit). CR6-SE thermistor and heating elements fit into the Spider, attach these before mounting. Part B: Fan Support - Connects to Part A with existing fan-to-heatsink screws. Designed for the stock CR6-SE heatsink fan - should fit easily into the 'box' area of Part B, with gap at the top for the fan's cables. Two prongs from Part A fit into the screw holes in the top corners of the fan - push these into place before screwing B to A. Try sanding or clipping excess support residue from prongs if jammed when fitting into place (I did not need to do this since my supports came away cleanly).