Creality/Sovol Y Axis Belt Tensioner

prusaprinters

I designed this because I found it difficult to equally adjust each side of the original tensioner. This new tensioner allows you to adjust each side with a pair of M5 bolts at the front, which makes the job much less tedious and frustrating. The puller snaps into the frame, and the bearing pin sits in a groove cut into the puller, which doesn't allow it to fall out when tensioned. The pin press-fits into the bearings, so be careful!Hardware required:x6 M5x10 Hex screwsx6 M5 T-Slot nutsx2 M5x40 Hex boltsx2 M5 Hex nutsI used PETG for the frame and puller, and Nylon for the pin.I'd recommend applying silicone grease to the slides for smoother operation.If you have any problems, feel free to let me know!Print SettingsPrinter:Sovol SV01Rafts: Doesn't MatterSupports:YesResolution: 0.2mmInfill:30%Filament:Prusament PETG, Taulman Alloy 910 PETG/NylonGalaxy Black, Prusa Orange Notes: Nylon is required for the bearing pin, PETG will most likely deform under the tension.  Category: 3D Printer Accessories