Creality LD-002R Angle

thingiverse

There are three versions: The first without nut. A second in which the nut is inserted through the hole and a plug is put on. Third, the nut must be inserted at the same time as the main part is printed. With a layer height of 0.2mm, you have to pause the impression to insert the piece, once the 100th layer has been made. Nut: M6x5 Screw: Measurements: M6x15 There are two versions. One for round head and one for hexagonal head. The stem is inserted into the piece, and closed with the other piece, using cyanoacrylate. No need to put supports. The piece is already prepared. -------------------------------------------------------- Three options exist: The first is without a nut. A second version features a nut inserted through a hole, topped with a plug. In the third option, the nut must be installed simultaneously as the primary component is printed. With 0.2mm layer height, you need to pause printing after completing the hundredth layer to insert the piece. Nut: M6x5 Screw: Specifications: M6x15 Two versions are available: one for round heads and another for hexagonal heads. The stem is inserted into the part, then secured using cyanoacrylate with the other component. Supports are not required; the part is pre-prepared.