Creality K1 / K1C Riser / Top Hood with Vents (Removable Magnetic)

prusaprinters

Upate 16-July-2024 - As pointed out by Zaos_2255249 I should change the magnet holes to be 10x5x2mm so that all magnet at that size will fit & if yours is a bit smaller you can just glue into place etc, as different suppliers will have slightly different tolerances. so ive up dated all files to fix this small issue..I remix a great design to suit my needs better, it suits the way I'm going to be upgrading my K1 Printer. Im doing away with the cable chain so wanted a bit more height in the top, and wanted lots of ventilation for when printing PLA etc. Please share your make when you print yoursI’ve added a Split version of the main vented part and a single version for us that are lucky enough to have a larger printer to print it as one piece. PLEASE NOTE - You will need a longer PTFE tube from the extruder to the filament sensor if you take it through how ive done it. Only other thing you should need is Magnets 10mm x 5mm x (2mm deep)The original had the top just sit on and moved around a bit to much for me, and I also wanted to add some more colour to the top so I did a Top Lip which uses M3 x 6mm screws in the 4 corners and it hold the lid nicely in place, and also make the finished model look a bit nicer (in my opinion). This is just glued in placeORIGINAL               My LIP Design        I’ve added a plain front version in case you don't want the Hex patten like I did.I glued everything together, here's a pic of how to start, screw corners into place and then glue the other parts from here and then once glued you can unscrew and take it on/off and holes will always line up perfectly.         Here's the way I printed the parts to get nice finished prints, but you can print them differently if you like.                              Let me no if ive missed something, as this is my first time ive ever uploaded a design/remix.If you have any questions or need help or maybe changes, please let me no.