Creality Ender3V2 Plotter attachment, for use with a BL Touch / CR Touch

thingiverse

Plotter / pen attachment for your 3d printer. Designed to attach to the CR Touch / BL Touch attachment plate for a Creality Ender 3 v2, such that both can be used on the printer at the same time. Part is strongest when printed with the tube upright, but other than that it can be printed either way up. Supports from bed are necessary, but none are needed within the model. Designed to work with: 2 M3x20mm bolts, 2 M3 nuts, 1 M4x30mm bolt, 1 M4 nut. Although it should be fairly easy to shrink the M4 hole and nut profile in CAD software, and 20mm M3 bolts is overkill - you could get away with 15mm. Holes are pretty tight, to reduce wobble, so you may end up tapping the holes with the bolt as you assemble the plotter onto your printer. There is an internal space for a magnet should you wish to add one mid print. In my experience a magnet was not strong enough to firmly hold the pen. Test-printed in 0.4mm PLA at 0.2mm layer height; infill 50%.