Creality Ender3 S1 Ribbon Cable Strain Relief
prusaprinters
<p>Unlike other designs for the Sprite extruder ribbon cable with horizontal cable output, mine runs cable vertical which:</p><p>1. naturally conform to how the cable run towards the next clip</p><p>2. provides more space away from the Z-extrusion even with full extended range for X (from -10.0 to 250.0), and Z=270.0 even with glass bed. I planned to design a nozzle brush at the far right of x-gantry such that it can work with “wipe nozzle between layer” slicer setting.</p><p>The print-in-place clip probably works best with PETG which is more malleable. I printed with PLA just to see if too stiff but turned out OK.</p><p>I printed with 0.2mm layer height, 0.48mm line width 3 walls with 0 infill (walls cover all infill areas). No support needed.</p><figure class="media"><oembed url="https://youtu.be/IQSQ4W1v48M"></oembed></figure>
With this file you will be able to print Creality Ender3 S1 Ribbon Cable Strain Relief with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Creality Ender3 S1 Ribbon Cable Strain Relief.