Creality Ender-4 Upgrade to BTT TFT35 v3.0 Touch Screen Display

thingiverse

Upgrade to BigTreeTech BTT TFT35 v3.0 touch screen display compatible with 12864 LCD module with 30* display holders that are exactly the same as described on https://www.thingiverse.com/thing:3465370 and in https://www.thingiverse.com/thing:3549320. The main advantage of this 3.5" TFT is that it can work as a graphic display connected to COM port with a touch screen, and also emulate a conventional 12864 LCD display at the click of a button. More information about BTT TFT35 display and firmware is available @: https://github.com/bigtreetech/BIGTREETECH-TFT35-V3.0. This is a simple and minimalistic front panel print with no support required, which will fit any 20x20 frame perfectly. Changes needed in the Marlin: // comment out old 2004 Controller (dash symbol is removed): // define REPRAP_DISCOUNT_SMART_CONTROLLER define 12864 Graphic Controller: define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER The total budget for this project is approximately $27 USD for the module. Bill of Quantities: 1 x BTT TFT35 V3.0 Touch Screen Display module: http://got.by/3x2p80 1 x Display Front Panel: print face down, no support needed 2 x Bottom Holder, 1 x Top Corner Holder - refer to my post @ Thingiverse: https://www.thingiverse.com/thing:3465370 Enjoy! UPDATE: The reset button may be soldered to the TFT module with a tiny shift (as in my module). This means it will not fit perfectly in a dedicated whole.