Creality Ender 3 v2 - Clean Shroud (40x20mm Fan & Stock 4010 Blower)

prusaprinters

<p>This replaces the original Shroud</p> <p>For 40x25mm Hot-End Fan and the stock 4010 Blower Fan!</p> <p>I made a new shroud from scratch for a upgraded 40x25mm Hot-End Fan and the stock 4010 Blower Fan (and its mounting) for Creality Ender-3 V2.</p> <p>The screw holes are smaller so you can use small wood screw or similar.</p> <ul> <li>Update 2022-01-24: Small adjustments made to the Main Shroud, larger Shroud Cover for a snug fit.</li> <li>Update 2022-01-30: I printed the model and everything fits just fine. You can still use the original screws, but you will have to heat one screw with a lighter and gently screw in it in the hole, this will thred the hole. Then gently screw it out and let everything cool.</li> <li>Print the Shroud Cover with the Creality-logo faceing up!</li> <li>Print the Shroud so you have the open side up, and the front side down. Use supports (10% Zig-Zag)!</li> </ul> <p>Fasten the Cover to the Shroud with double sided tape, after you mounted the 40x20mm fan.</p> <p>I hope everything will fit!</p> <p>Happy Printing!</p> <h3>Print Settings</h3> <p><strong>Supports:</strong></p> <p>Yes</p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.12, 0.16, 0,2</p></div> <p><strong>Infill:</strong></p> <p>100%</p> <p><strong>Filament:</strong></p> Any PETG, ABS, PLA <p>Any</p> <p><br/> <p class="detail-setting notes"><strong>Notes: </strong></p> </p><div><p>Use a Filament Material that handle higher temp.</p></div> </p> Category: 3D Printer Parts