Creality Ender 3 Pro PSU Brackets

thingiverse

After looking for mounting brackets to relocate my Creality Ender 3 Pro PSU so I could put my printer inside the Creality enclosure, I decided to design my own. I needed brackets to be able to relocate my PSU separately from the printer so it didn't risk overheating inside the enclosure and all I could find were relocation brackets to move the PSU to the rear or bottom of the printer. These brackets have 5mm thick walls and are 55mm wide (work in progress so dimensions may need some tweaking to get the right fit), with 25mm "wings" that have (2) 4.20mm screw holes screw holes are 10mm from top and side edges of the bracket. These are designed to be screwed into a wooden surface and the PSU sit in them with the fan facing outward. I am printing with supports for the screw holes, but haven't tried to print without. Along with these brackets, I had to solder some wire and connectors to extend my PSU cable (could have sliced the wire in the middle, but wanted to keep the original wiring and connectors intact). Connectors: https://www.amazon.com/Amass-Bullet-Connector-Upgrated-Sheath/dp/B074PN6N4K/ref=sr_1_1?dchild=1&keywords=Amass+10+Pair+XT60H+Bullet+Connector+Plug+Upgrated+of+XT60+Sheath+Female+%26+Male+Gold+Plated+for+RC+Parts&qid=1612992893&sr=8-1 Wire: https://www.amazon.com/BNTECHGO-Silicone-Flexible-Strands-Stranded/dp/B01ABOPMEI/ref=sr_1_1?dchild=1&keywords=BNTECHGO+12+Gauge+Silicone+Wire+10+ft+red+and+10+ft+Black+Flexible+12+AWG+Stranded+Copper+Wire&qid=1612992922&s=electronics&sr=1-1