Creality CR6-SE Filament Guide Body

prusaprinters

A simple design for a clip-on filament guide body for the Creality CR6-SE. Only my second design and am new to 3D printing. This design is heavily influenced by (not a remix of) two (2) designs: CR6-SE Top & bottom mount filament guides by agent9 Creality CR6-SE Filament Wheel Guide Mount by jeremiahburt23 Also as stated in jeremiahburt23's description this too depends on: Ender 3 Filament Roller Guide by Holspeed 2x Spacers 1x Ring The only difference between the two (2) designs is I chose to try rounding edges. Personally, my test print of the square edges looked better but I think I was battling some other things (speed and temp) for the rounded version. I had switched settings just before printing and I think it went to defaults, not my tweaked settings. Parts needed: 1x #8 machine screw 1x #8 nut 2x #8 washers (optional) 1x 608 bearing (what I had laying around and what the bag says. Spare parts from another project) Print Settings Printer: Creality CR6-SE Rafts: No Supports: Yes Resolution: 0.16/0.28 Infill: 25% Filament: Mika3d PLA Blue Notes: Using a Creality CR6-SE printer (not available in the drop-down list of printers) Using Cura I selected "Touching Buildplate" for the supports. My final version I printed at 0.16 but I liked the look of the 0.28 better. Category: 3D Printer Parts