Creality CR10S Pro Bondtech/ V6/ Volcano Direct Drive

thingiverse

Initial release of a BMG/V6 direct drive for the Creality CR10 S PRO. Hardware list to follow. All parts will print in the orientation downloaded with either no or minimal support from the build plate only. The duct has enough vertical adjustment to accommodate Volcano hotends. Hardware: To secure the extruder cradle to the mounting plate, three M4x50mm socket head bolts are required. Three M4 washers and three M4 nuts will be needed to complete this task. To secure the duct to the mount, three M3x16mm domed head screws will do the job along with three M3 washers and three M3 nuts, preferably nyloc. To fix the 5015 blower to the duct, one M3x22mm socket head bolt, one M3 washer, and one M3 nut, preferably nyloc, are necessary. To secure the shroud to the shroud mount, two M3x15mm socket head screws will be required along with two M3 nuts, preferably nyloc. To secure the 4010 fan to the shroud, two M3x18mm domed head screws and two M3 washers will do the trick. Two M3 standard nuts are also needed for this task. To secure the mounting plate to the carriage, three M3x6mm socket head screws and two M3x8mm domed head screws will be necessary. To secure the probe mount, one M3x8 socket head screw, one M3x16mm socket head screw, and two M3 nyloc nuts are required.