Creality CR10/ Ender2/ Ender3/ Ender5 V6 Hotend Mount and Part Cooling Duct

thingiverse

A V6 Mount for CR10 and Ender Series 3D Printers. This is a revised design utilizing proven CFD developed part cooling airflow to achieve optimal results. This iteration has been repackaged to fit the Ender 5 series without limiting forward Y axis travel, ensuring it doesn't hit the front rail. The mount and duct utilize heat-set M3 inserts (x6) for a reliable and robust threaded fixing. The hardware consists of: 2X M3x10mm socket button head screws securing the mount to the X carriage. 1X M3x22mm socket cap head screw securing the mount to the X carriage. 2X M3x20mm socket countersunk screws securing the mount clamp to the mount. 1X M3x12mm socket cap head screw and 1X M3 washer securing the duct to the mount. 2X M3x22mm socket button head screws and 2X M3 washers securing the 5015 blower to the duct. Additional M3 hardware is required to secure the BLTouch to its bracket and the bracket to the mount. Print parts in the orientation they are downloaded. Only the mount requires support from the build plate, with four walls at 0.2mm layers and 15% infill recommended. PETG or ABS filament is preferred, but PLA can be used if necessary. Position the underside of the duct 1-2mm above the nozzle tip. BLTouch offsets are X -34.6mm, Y 0mm.