Creality CR-10s Pro Enclosure

thingiverse

This is a fully printable enclosure design for the CR-10s Pro. Approximately 2kg of filament (I used PLA) and around 150 hours of print time are required. It's designed specifically for 1/8" wall panels, with hardboard used for all but the front, which is made from acrylic. However, you can use acrylic for all panels to create a completely clear enclosure. To assemble this enclosure, refer to the build guide pdf included in the download package for detailed instructions on materials, printing, and assembly. The finished dimensions of this enclosure are: 25"w x 30"d x 27.5"t. The legs can be adjusted to fit on narrower tables. Here's a list of materials needed: * Roughly 2 kg of filament * 5 pieces of 2' x 4' x 1/8" hardboard * 1 piece of 24" x ~28" x 1/8" clear acrylic * Around 150 #6 x 3/8" sheet metal screws to attach panels * 4 #6 x 1" sheet metal screws to attach legs * 8 6-32 x 1/2" machine screws and nuts to attach LCD cover and optional filament seal * 1 piece of 36" x 1" door sweep, bristled (optional) For further discussion on this enclosure design, visit the following link: https://www.reddit.com/r/CR10/comments/gamw24/ok_as_requested_my_printable_cr10s_pro_enclosure/