Creality CR-10 Top Mount Spool Holder V2 - Easy Swap

thingiverse

I created the V2 Top Mount Spool Holder for the Creality CR-10 earlier, in the link below. The upside is that the process of removing support materials from the Cone Lock and changing filament spool will require just a 35mm screw as lock pin! CONVENIENCE! Now comes the V2, which can be locked/unlocked with just a 35mm screw as lock pin! This has variable holes location so you can make minor adjustments that allow your spool to rotate smoothly. Being top mount saves space by raising your printed and having the control box beneath it. https://www.thingiverse.com/thing:2607316 *** Instruction *** *** User A *** If you're printing my spool holder for the first time, print everything in the file. You'll also need to use the following screws: 2x M4 short spare screw that came with your printer 2x M4 spare stopper that came with your printer (or purchase here https://go.edwardrc.com/2DS7EZZ) 2x M4 25cm(thread length) screw 2x M4 nut or lock nut 1x M3 35mm socket head cap screw Assemble "Cylinder Spool Holder V2" to the "Spool Holder Bracket" with M4 25cm screw and a M4 lock nut. Slot the M3 35mm screw into the Pin Head. Superglue if it's loose. Remove the 2 screws near extruder (carefully of the lock washer underneath!), put on the "Filament Feeder V3" and put back the screw, could be tricky to line up. Require bed leveling calibration after this. Now mount your "Spool Holder Bracket" onto the top rail of your printer with 2x M4 short screw and stopper that came as spare with your printer. Load your filament spool, adjust & lock the cone to your desire position with the various hole position. Please slot in a short PTFE tube into Feeder V3. *** User B*** If you printed my V1 before, just print everything except the "Bracket", then swap them. Where to get Creality CR-10 https://www.banggood.com/DIY-Creality-CR-10-3D-Printer-300300400mm-Printing-Size-1_75mm-0_4mm-Nozzle-p-1085645.html?p=DG23031123036201501P