CrazyFlie 2 Chasis

thingiverse

Print Clip on and Fly. For CrazyFlie 2.0 Only, Landing gear is separated from Pods so there's no risk of damage to either component. Extended POD for Power Toggle protects the button, allowing you to simply squeeze it to turn on and off. All CF2 extended boards are connectable, with a degree of protection provided on the underside. Additional inserts facilitate physical attachment of cargo bays, etc. Wires for motors don't need twisting as they're fully utilized, with connectors protected and supported by the design. Print Settings: Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: No Resolution: 0.4 Nozzle at .1mm layer height Infill: 20% Post-Printing Instructions: 1. Insert legs. 2. Place motors into Pods, noting wire placement and angle inside. 3. Attach undercarriage to Main board. 4. Ensure wires are set up as displayed, with the connector on the printed POD's end. 5. Gently insert Main board into POD while guiding the connector. 6. Carefully clip POD to Main board using one hand, guiding the connector with the other.