CRAWLER CAT 1 Expedition Cab - 1/10 body attachment

myminifactory

PLEASE make sure your 3D printer is able to print a minimum size of 180x235x205mm. before purchasing.   The Cat 1 “Mammoth” was just meant to push the limits of exploring. The new Cat 1 Expedition Cab is here! If you haven’t seen this awesome build yet, you should check it out here The Cat 1 Expedition Cab is an addon attachment for the Crawler Cat 1 “Mammoth”. (Cat 1 Mammoth truck cab SOLD SEPARATELY) The internal volume is currently in our range, by far the largest. This means there’s more space for supplies and luxury, for those extra long expedition trips. The Cat 1 Mammoth body can be found here It is also designed to be used with the Crawler Cat 1 “Mammoth” with a 420mm wheelbase configuration, and for those who want a more aggressive and wider stance with their Mammoth, the “Wide Track Fenders” for this expedition cab is also included! Whether it be arctic exploration or in full deep mud, we’ve got you covered.   Similar to the Crawler 4320 Expedition Cab, this one is also packed with a ton of interchangeable modular accessories. These mainly being a fuel carriage with fuel can, antenna mount with 2 antennae of different lengths, multi purpose box, rear visor, and more. But the coolest accessory added to this cab are traction boards and an externally mounted functional tray with door, to store 2 traction boards. There really are a lot of detailing on this cab, including different mock hinges for the windows and mock compartments. Along with that, side vents and a power socket similar to the one from the 4320 Expedition Cab are also designed. LED lights can be mounted to the cab side and the taillights to make this a truly realistic looking cab. All you will need are; 6x Orange 3mm LED, 2x White 5mm LED, 2x Orange 5mm LED, 2x Red 5mm LED. The side door can also open and lock as you turn the door handle, small model hinges are required for this to function. Polycarbonate sheets can be cut according to the included .DXF files and can be mounted in the grooves, which function as the windows! A sunroof is also designed so you get the option to either cover it permanently or open it to let the air in.     Assembly instructions:View the link below to download the assembly instructionsaheadrc.com/manual     Designed to be printer friendly, the parts come in a variety of included options. Cab: (Ideal to print in upside down orientation)- Cab full (cab is a 1 piece print. Requires a printer that can print a minimum of 180x235x415mm)- Cab split(splits the cab into 2 halves, a 2 piece print. Requires a printer that can print a minimum of 180x235x205mm) Fender:- Standard (standard width meant for 240mm width outermost tyre to tyre)- Wide track (meant for 265mm width outermost tyre to tyre)- Full (full length, 1 piece print. Requires a printer that can print a minimum length of 330mm)- Split (split length, 2 piece print. Requires a printer that can print a minimum length of 180mm) Cab rear panel:- Visor (The rear panel designed for use with the rear visor)- Non visor (The rear panel designed for use without the rear visor) Rear antenna:- Short (For use with or without the rear visor)- Long (For use without the rear visor) Some files will need to be printed multiple times, this includes the following:Cab joiner inside x2Cab joiner outside x2Side vent x2Cab side light lens x6Cab side hinge x11Window hinge x15Tail light lens x6Traction board x2     DXF files for the windows can be found here: https://www.aheadrc.com/dxf-files   It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body. Should you need any help, please do not hesitate to contact us!