Crapper rocket toilet bowl brush holder

prusaprinters

<p>I picked up a Rubbermaid bowl brush and they offer a holder for $2.66. Screw that, I can<em>print one!</em> It's a bigger thing so I designed it to be pretty minimal and quick to print, thus the "fins" to increase the base and give it stability without dramatically increasing the print time. Makes it look like a rocket, which is cool. My original title sounded better but "crapper" seemed like a more acceptable prefix.</p> <p>Two available things - one has 1.6mm wall thickness for a standard printer with a 0.4mm nozzle which will give 4 walls and thus a nice quick print. The other has 2.01mm walls which is what PrusaSlicer recommended for 0.3mm layer height and a 0.4mm nozzle on my Mk3S. This also gives four walls when sliced on PrusaSlicer.</p> <p>For two other (maybe nicer but decidedly less rocket-looking) bowl brush holders, see MikeLauderdale's <a href="https://www.thingiverse.com/thing:2766048">fancy design</a> and his <a href="https://www.thingiverse.com/thing:2766057">smaller footprint design</a>.</p> <h3>Print instructions</h3><h3>Category: Bathroom Summary</h3> <p>I picked up a Rubbermaid bowl brush and they offer a holder for $2.66. Screw that, I can<em>print one!</em> It's a bigger thing so I designed it to be pretty minimal and quick to print, thus the "fins" to increase the base and give it stability without dramatically increasing the print time. Makes it look like a rocket, which is cool. My original title sounded better but "crapper" seemed like a more acceptable prefix.</p> <p>Two available things - one has 1.6mm wall thickness for a standard printer with a 0.4mm nozzle which will give 4 walls and thus a nice quick print. The other has 2.01mm walls which is what PrusaSlicer recommended for 0.3mm layer height and a 0.4mm nozzle on my Mk3S. This also gives four walls when sliced on PrusaSlicer.</p> <p>For two other (maybe nicer but decidedly less rocket-looking) bowl brush holders, see MikeLauderdale's <a href="https://www.thingiverse.com/thing:2766048">fancy design</a> and his <a href="https://www.thingiverse.com/thing:2766057">smaller footprint design</a>.</p> <h3> Print Settings</h3> <p><strong>Printer Brand:</strong> Prusa</p> <p><strong>Printer:</strong> i3 MK2S</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0.3mm</p> <p><strong>Infill:</strong> 20%</p> <p><strong>Filament:</strong> Hatchbox ABS white<br/> <strong>Notes:</strong></p> <p>printed in ABS only because that's what I had on hand. Figured for sure I'd have warping issues so printed with a 10 or 12mm brim which helped.</p>