Crankbait Fishing Lure

cults3d

Medium deep diving Crankbait with great action and easy to build. I made over 20 prototypes with different lips, air chamber and weights, to make sure it works perfectly!!!https://www.youtube.com/watch?v=YUkz0GFD8Ho&ab_channel=Dominik What you need: -Stainless spring steel wire! (this build depends on the stiffness of spring steel wire! don´t use normal wire!) -Lead ball (you can use Cheburashka balls or the ones with the hole in them from carp fishing equipment) -Epoxy -eyes -Pliers -split rings and hooks optional: -swivel -screwed eyes -paint Instructions: See Pictures! 1: fill the hole for lead ball with a bit and the hole for the hook hanger completely with epoxy 2: insert the lead ball and the hook hanger into their holes. For the hook hanger, you can choose between a swivel and a hook hanger made of spring steel wire (you see it better on pic 4 how to bend it) 3: insert the main wire bent like on the picture 4. Make sure, the hook hanger is caught by the main wire 5: make a small loop and 2 wraps around I also uploaded a screwed eye version. I don´t think this needs instructions ;) Sizes: 80% scale needs: 0.5 - 0.6 mm wire 1g lead ball under 5.8mm diameter 6mm eyes #10-12 hooks 100% scale needs: 0.6 - 0.8 mm wire 1.8 - 2g lead ball under 7.2mm diameter 8mm eyes #6-8 hooks 125% scale needs: 0.8 - 1 mm wire 3.6 - 4g lead ball under 9mm diameter 10mm eyes #5-4 hooks Stencils: They allready have a tollerance and can be printed in the same scale as the lure. The one with the scales is propably not printable with fdm printers. I also uploaded a blank DIY stencil, you can make your own designs with thinkercad or meshmixer. I only uploaded one side, so you need to mirror it in your slicer. Print Settings: 100% infill! 0.1 - 0.2 mm layer height 2 outer lines no support (only for stencils or to prevent it from falling over)