CR2032 Light Ring Remix

prusaprinters

Modified version of "Illuminated Bling Ring" & “Illuminated Bling Ring with CR2032” by user GeekMomProjects(also see different cover with this top - https://www.printables.com/cs/model/262109-star-covershadetop-for-cr2032-light-ring-remix )I wanted to have dome version, but for version CR2032 which was not available even with combining with other user's model.Modified: Ring/Battery holder - center of the LED in center of the domewire channels to match new positionnew locking system ring-domedome is based on original, but scratch build new, slightly larger to fit around batteryremoved claw-tip near led areaadded led polarity clue for round packageschanged distance inbetween led wires/pins placeWorks with any 5mm two wire LED that lights up directly from CR2032 (LED).If you have trouble to tight-fit push parts together : verify you are mounting into correct position/rotationyou can gently squeeze dome on thicker sides during pushverify if led wires are not stuck on sides and blocking the lock-fitDon't get confused, some RGB / changing color leds does light up even if they are rated on higher voltage. Mind the polarity, always longer wire goes on + (bottom=larger surface of the battery). Also - Flat side of round package of the LED matches flat line at mount place near wire hole (first picture).Tested so far (all worked) gme.cz shop:GME.cz codemanufacturer codecomment511-3445XRGB-F2-SLED colorchange RGB; 5 mm; 30°518-331F506RGBC2E-F1Colorchange LED 5 mm; RGB; 2 wires; 20°; 4,5 V518-442OST1MA5A32ALED colorchange flash RGB; 5 mm; 30°518-543OST1MAEDD1ALED high brigthness - diamond shape - wide 4,85 mmMy most favorite led effect was this one:https://www.gme.cz/led-5mm-fade-rgb-4000-2180-7000-30-ost1ma5a32a for mount guide (if you need) follow clue on the picture or steps by original author here:(https://www.printables.com/cs/model/136889-illuminated-bling-ring) andhttps://www.printables.com/cs/model/153418-illuminated-bling-ring-with-cr2032