CR10-V2 Hot End Light Bar
thingiverse
I decided to simplify my CR10V2 hot end lighting to a rear light bar with more clearance than my halo light. This light bar mounts on the back of the carriage plate using the two bottom screws going into the hot end housing. The connection tabs of this light bar are 2mm thick and leave enough depth for the bolt to meet the housing threading. You could use longer bolts, but it is not necessary. The lights are at a 45 degree angle and are over 1mm above the nozzle tip. This light bar uses Super Narrow LED 0.12in Width, I used specifically SuperlightingLED brand found on Amazon. The sides of the light bar are designed to block light from hitting your eyes from the side.These are 12V, I chose to use a separate 120V plug with a 12V power supply and switch. Printed in PETG, 100% infill, 0.2mm height. Strongest when printed standing up.
With this file you will be able to print CR10-V2 Hot End Light Bar with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on CR10-V2 Hot End Light Bar.