CR10 direct heavy duty mod, titan + v5heatsink+volcano/ or / v6heatsink + pancake motor BETA

thingiverse

This is a beta mod, needing testers, as per Rasmus Schmeer's request from the Ender 2 group user. UPDATE (ver2): Improved fan mounts are now included for easier fitment. The mount gap between motor and Titan has been reduced from 4mm to 3mm; standard screws should work just fine. UPDATE: A friend pointed out that this work will also function with: A Volcano nozzle + V5 heatsink Or a V6 standard E3D nozzle, which is approximately 8mm longer NOTE: This is for a volcano, and I'll be working on a standard V6 version soon. THIS IS A BETA MOD; not tested, so any testers would be greatly appreciated. This mod is a fork from another of my direct designs, specifically created to use a Titan feeder in combination with a Volcano + V6 hotend and a pancake motor. It should be very stable and feature a low-weight carriage mod due to the little motor. Files included are: Motor mount 2 cooling fan mounts for the hotend, one for a 40mm fan and one for a 30mm/fan; I think a standard E3D fan will also fit without issue 2 cooling mounts for the print, one standard on the right and another round on the hotend, each using only one 5015 blower; there will also be proximity sensor versions Proximity sensor hole is 18.5mm, similar to the ABL from th3D, with a distance of 56mm from the nozzle on the X axis. Cooling mounting: Hot end: 2 M3 x12-15 bolts and nuts Print: ignore the old heatsink mounting holes; just use a 3mm bolt on the rightmost and one with a bolt on the opposite rear part of the direct mod, using an M3x15+nut Parts still need to be arranged for printing. V6 version can be found here: https://www.thingiverse.com/thing:2924585