CR10 Direct Drive Mount

thingiverse

I was inspired by [s_gutz's direct drive extruder mount](https://www.thingiverse.com/thing:2735674), and I decided to try my own take on it. I wanted to use as many stock parts as possible without sacrificing bed space. The mount also includes a mount for an 18mm Sensor, which can be either capacitive or inductive if it's 18mm in size. The offsets for the probe are set at -50MM X and -10MM Y; look up how to adjust these settings in your printer firmware, although it's not necessary if you don't have a Z probe. UPDATE (2/23/2018) The final files for version 2 include updated clearances. I've also removed the outdated version 1 design. UPDATE (2/21/18) Although the version 2 design works well enough, it has some clearance issues that need to be addressed. The 18MM probe is quite tight and will require a little coaxing to fit properly. Additionally, the angles for bracing the stepper motor are off, so they'll need to be sanded or clipped off. These issues will be updated soon! Despite this, version 2 is still much better than the first design. UPDATE (2/19/2018) I've uploaded the files for the two-part design, which includes an 18MM mount, a motor brace, zip tie mounts for the wires, and it's now flat printable. The only caveat is that this version has not been thoroughly tested; however, it's currently being printed on my machine.