CR10 - 5S BRACING / Z REINFORCEMENT
thingiverse
The Creality CR10 - 5S is a big and heavy printer, lacking sufficient stiffness. Greater rigidity (especially along its Z-axis) can be achieved mounting braces. There is no proper adjustments, so use a big square to keep the Z axis perpendicular to Y. Little adjustments of 1 -3 mm distance can be done before tightening screws. These blocks are only valid for the Creality CR10 - 5S and should be printed with 100% infill Besides the 4 (2+2) blocks you will need: 2 aluminium profiles 2020 x 750 mm (max. length 754 mm) 28 x T-nuts (4mm hole) 28 x Screws M4 x 10 mm 2 x Screws M4 x 10 mm round head if the HEX-head does not fit the 2020 slot (see last picture) 28 x Washers NOTE: this structure will shorten your printing height a little bit. Enjoy printing O. Creality CR10 - 5S Creality CR10-5S Creality CR105S
With this file you will be able to print CR10 - 5S BRACING / Z REINFORCEMENT with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on CR10 - 5S BRACING / Z REINFORCEMENT.