CR Falcon2 Wallmount

thingiverse

I have been looking for a wall mount for my Creality Falcon 2 laser engraver for a long time. After failing to find one, I modelled my own.Instructions:Print out the right and left halves at 100% and push them togetherHold the bracket on the wall with a spirit level (if necessary, stick it on temporarily with adhesive tape)Make the drill markings through the holes in the modelRemove the model and drill the holesFasten the bracket with 4 screws (max. diameter 5.9 mm)Mount the laser and honeycombTips:It's best to print the holder in ABS or PETG. I printed it in PLA and, as you can see in the pictures, it is sagging a bit. I would recommend printing with support structures.If not all legs of the laser touch the wall when hanging it, I recommend printing the file "Wallmount_Supporter" with TPU 4 times. Then the supporters must be placed over the existing legs. This guarantees that all legs touch the wall and the laser hangs straight.I hope that my model will help some laser owners to save space.Buy me a coffee :)https://www.buymeacoffee.com/flowok