CR-6 SE Z-Axis Linear Rail mount

prusaprinters

Update 12 Dec. 2021I'm currently working on another Z- and X-Axis linear Rail Mount thing…Update 03 Aug. 2021I noticed that I had a lot of wobbling after the modification. When investigating the cause, I noticed that the brass nuts had a lot of play, they had been rinsed out properly!Then I made these anti-wobbling parts (https://www.thingiverse.com/thing:4871212) with these T8 lead screws anti backlash nut (https://www.thingiverse.com/thing:4227492). When assembling I then definitely found the cause of the worn out brass nuts: The T8 lead screw was not centered with the hole in the guide, so I also created and installed the "Unterlage" (didn't find the english word), Left and Right.This are MGM12H HiWin Linear Rails 370mmLinear Rails should be 300-370mmyou may need 1-2 washers if the screw scratchesPrint SettingsPrinter Brand: CrealityPrinter: CR-6 SERafts: NoSupports: NoResolution: 0.20mmInfill: 40% GyroidFilament: purefill PETG light green Notes:PUREFILL PETG240°C/70°C (first Layer 245/78)Slicer: Cura 4.9.1Wall: 4x 0.45Speed: 60/30 mm/sInfill: 40% GyroidExtruder: Bondtech LGXHotEnd: Slicer Engineering Mosquito, 0.4 mm Nozzle