CR-6 SE Direct Drive Mount

thingiverse

###This is a remix/mashup of [Konton CR6 SE Direct Drive Mount](https://www.thingiverse.com/thing:4701896), and [Lope26 Cable Support](https://www.thingiverse.com/thing:4685197), and [Skeaton250 Breakout Board Cover](https://www.thingiverse.com/thing:4685197) combined together to be an awesome upgrade to the Creality CR6 SE. Currently I have printed Konton's DDM and the fit up is great! Kudos to Konton! After looking at the cable arrangement I then "modified" (read took cutters and started hacking) an already printed Lope26 cable support to attempt to make it work with the DDM with no success. Then seeing that the breakout board was overly exposed to wild man with cutters I "modified" Skeaton's cover to work with the DDM with success but rough looking results. And that bings us to the mashup offered here. As of 2021-02-21 I am waiting for cables to hookup the stepper and sensor so I can print out this design, after which I will post pics and slice suggestions. There are currently 5 parts to print and after I sleep on it the design may change so stay tuned or be adventurous and print it then please share your thoughts and results. V15 2021-02-25: * Moved the fan up and rotated so it should miss the bed plate clips on the front of the bed. * Modified the board cover to be a better fit. * Added a third mount hole for the fan as I noticed it had sagged a little. * Added Led-less option * Note: The board cover still needs some work. V25 2021-03-21: * Modified the LED mount tang to not fit so tight. * Cleaned up the mount faces. * Added more clearance to the cover for the heat sink fan. An issue I've found is when printing with PETG at a lower temperature the extruder will push and pull on the hotend causing poor print quality. Next revision will have a hard stop limit on the bottom side of the load cell or maybe mount the whole extruder on the cell.