CR-10s swing-up LED light

thingiverse

Here is a modified version of this swing up LED light: https://www.thingiverse.com/thing:2492135 I was unable to use the above link because my CR-10s X-Axis cover differs from the CR-10 model. To make it work, I took the following steps: 1 - I used this X-Axis cover (2835282) and designed a clip-on cover for the new CR-10s X-Axis mount to fit the original author's X-Axis piece. 1.5 - I added a "stop" to the X-Axis Mount, as there was no one before. 2 - I modified the pivot piece to make it stronger (thicker) and fit the LED light arm better. 2.5 - I added two small rails so the cable could be pressed into the pivot piece for cable management. 3 - I extended the LED light mount and added two mounting holes to fit a specific inexpensive LED light from Amazon. 4 - I modified the thickness of the pivot cover and x-axis mount holes to snugly use one of the screws from the LED light. No tools or extra screws are required, except a small Phillips head screw driver, and the screws from the LED light package. Patience is also necessary to get those screws in, as the holes are snug to ensure the threads grip. The LED light can be purchased here: https://www.amazon.com/gp/product/B0798MJC84/ref=oh_aui_search_asin_title?ie=UTF8&psc=1 As you can see from the photos, I removed the cover of the LED light. The LED light is connected to the same smart switch my printer is connected to (using a 5V USB phone charger plug). When my printer turns on, the light turns on also. The Gcode files I used to make the CR-10s swing-up LED light you see in the photos are included. PLA: https://www.amazon.com/gp/product/B073LKLDV7/ref=oh_aui_search_asin_title?ie=UTF8&psc=1 This is the CR-10s that I purchased: https://www.amazon.com/gp/product/B078V7MHWY/ref=oh_aui_search_asin_title?ie=UTF8&psc=1 If you have any questions, let me know and I will try to help.