CR-10s Standalone "Matador Edition"

thingiverse

This project has taken me quite a while to finish, and I've had to remix several things as well as draw inspiration from various sources in order to bring it to life. It will take some time for me to remember exactly which elements I used and who I should thank for their influence, so please be patient while I continue to update this project with proper credits and acknowledgments. The build is pretty self-explanatory. The frame and Z support are made from 2020 extrusion, and I've inserted a 1/4 ABS Sheet into the extrusion to keep electronics safe. The 2020 extrusion hinges on the back for quick and easy access to electronics, and I've used 5050 White LED's in aluminum channel attached with Velcro wire management tape. I also used CR10s extension cables, which are required for this build. However, I was shipped the wrong ones initially, so I only had the extensions for the bed and hot end that worked. As you can see from the pics, I routed some of the cables through a panel on the left side of the base. If I had the proper extension cables, I would run them all through the back of the base with the rest of the cables. The parts that build the walls of the base require the following: 60mm_support_Front_corner_mk2.stl - one for each corner 150mm_angle_vent_panel_mk2.stl - two for each side 85mm_center_support_side_panel.stl - one needed for each side back_panel_mk1.stl - this is the only piece you need for the back display_mk5.stl - this is the only piece you need for the front CR-Board-Mount-mk4.stl - this mount will fit both the stock CR10s print controller and the TH3D EZBoard Post any questions or let me know what you think in the comments below. Thanks! Upgrades to come: Linear rails for X, Y, and Z axis Drag Chains for X, Y, and Z cables Non-printed upgrades: TH3D EZABL PRO auto bed level system - https://www.th3dstudio.com/product/ezabl-pro-plug-print-auto-bed-leveling-kit/ TH3D EZBoard 32bit print controller with trinamic drivers - https://www.th3dstudio.com/product/ezboard-lite/ TH3D EZFlex2 magnetic PEI print surface - https://www.th3dstudio.com/product/ezflex2-flexible-print-system/ Bondtech DDS For Creality3D CR-10 - https://www.bondtech.se/products/bondtech-dds-for-creality-cr-10 Mean Well 100W Power Supply - https://www.meanwell.com/webproductdetails.aspx?productnumber=RS-100-12 Squash Ball feet - https://www.amazon.com/Squash-Ball-Foot-Crush-Auto/dp/B01NBLQ12U/ Micro SD to Full SD extension adapter - https://www.amazon.com/Anker-Micro-SD-Adapter-Supports/dp/B06X3Y4BBB/ Hinges for 2020 Extrusion - https://www.amazon.com/Wooden-Hinges-Standard-Size-Metallic/dp/B07PXWCXVF/ Inspirations, remixes, and other things: The biggest inspiration was the use of 2020 extrusion to build a taller frame to install all the electronics in. This idea came from https://www.thingiverse.com/thing:3336912, where I borrowed his design to create my own version. I also used this mount to attach the EZABL probe to the Bondtech Direct Drive Extruder - https://www.thingiverse.com/thing:3673301. This spool holder was another remix - https://www.thingiverse.com/thing:2846383. And finally, I remixed the Squash Ball feet but unfortunately lost the original thing. I'll keep looking for it!