Cr-10s Pro V2 Direct Drive bracket
prusaprinters
<p>Print this part on a diagonal (as per the pic showing part on the bed) to avoid needing supports and to make it stronger. I've used petg.</p><p>Four shells, 50% infill.</p><p>There is a zip tie hole at the back.</p><p>I have the small bowden tube feeding into the extruder without a clamping end so that the extruder assembly can be removed easily. The bracket is strong enough to not flex when driving hard. </p><p> </p><p>Remixed from a thingiverse part that was for an aftermarket extruder</p><p><a href="https://www.thingiverse.com/thing:3664172">https://www.thingiverse.com/thing:3664172</a></p><p> </p><p>Good luck!</p>
With this file you will be able to print Cr-10s Pro V2 Direct Drive bracket with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Cr-10s Pro V2 Direct Drive bracket.