CR-10S Pro v1 cable chain with 90 degree brackets - REMIX with STEP file

thingiverse

This is a remix of ijohansson's "CR-10S Pro v2 cable chain with 90 degree brackets" but it is designed for the slightly narrower ribbon cable on the version 1 printer which I have. ijohansson's version is a remix of "CR-10S PRO side Cable Chain" by raymagic which the version here works with too (but no need to scale the chain, it can be printed at 100% scale). This will require about 28-30 of the chain sections from raymagic's cable chain linked below: https://www.thingiverse.com/thing:3318059 Parts required: 2x 12x3mm cylindrical magnets (which are optional but may help to secure the lower part) 1x M4x8mm screw 1x T-nut and suitable screw to mount the lower part to the vertical extrusion Note that the that the hole which the M4x8 screw goes into to secure the upper mount (on my printer at least) is not threaded so I just used the screw to cut the threads. But ideally the hole would be tapped since it is easy to strip the threads out this way. The parts are not arranged for printing, but you can see the pics for a suggested orientation. I would recommend using supports everywhere and also using tree supports in Cura (both types will help better support the large overhang on the base). The STEP file is included for easy remixing.