CR-10S Pro Bed Cable Chain.

prusaprinters

CR-10S Pro Heater bed cable strain relief. Along with normal printing I have run some torture tests to check for layer shift or excessive friction. I have had no issues. As a result of not having to drag the cable from the case there is in my opinion a reduction in overall friction. Optimized This option has thinner walls and tighter tolerances. if you chose to print this option, I would suggest printing 2 links and testing for fit and strength. You will need to print, 1 X Bed clip 15 X links or as many as you need. There should still be some free cable left in the case. 1 X Base If printed in the orientation shown in my photo, clean up any “Elephants foot” from the inside of the links with sandpaper or a sharp knife. This will allow free movement of the links. I found I did not have to remove the cable tie on the factory bracket to fit my bed clip. I have made allowances for a cable tie to be used to hold the clip on if necessary. thicker walled version is available. https://www.thingiverse.com/thing:3917041 Print Settings Printer Brand: Creality Printer: CR10S PRO Supports: Doesn't Matter Resolution: 0.12 Infill: 100% Filament: eSUN PLA+ Post-Printing ============= Category: 3D Printer Accessories