CR-10S Pro Bed Cable Chain.

thingiverse

CR-10S Pro Heater Bed Cable Strain Relief. I've run some grueling tests alongside standard printing to scrutinize for layer shifts or excessive friction, and I'm pleased to report that I've encountered no issues whatsoever. As a result of not having to yank the cable from its case, there's undoubtedly a reduction in overall friction in my opinion. Optimized Version: This option boasts thinner walls and tighter tolerances. If you choose to print this version, I highly recommend printing two links and testing for fit and strength. To get started, you'll need to print: 1 x Bed Clip 15 x Links or as many as you require - there should still be some excess cable left in the case. 1 x Base If printed in the orientation shown in my photo, make sure to clean up any "elephant's foot" from the inside of the links using sandpaper or a sharp knife. This will ensure smooth movement of the links. I discovered that I didn't need to remove the cable tie on the factory bracket to fit my bed clip. I've made provisions for a cable tie to be used if necessary to hold the clip in place. A thicker-walled version is also available: https://www.thingiverse.com/thing:3917041