CR-10 v2 stand alone

thingiverse

This is my mod to the CR-10 v2 to make it standalone, clean and quiet. More info on assembly will come. Materials: - 24 - M3 x 5 screws - 24 - M3 nuts - 4 - M4 x 10 screws - 4 - M5 x 60 screws and some washers - 8 - PCB standoffs/spacers male to female, with a length of 10 mm + 6 mm - Some 2,5 mm² wires (preferably black and red) - 15 - forked cable shoe - 2 - 10 pin flat ribbon cable 50 cm (For the display) - 2 - 120 mm fans - 1 - 80 mm fan - 1 - Wood board, countertop or another material with the dimentions of at least 52x40 cm - 1 - Micro-usb extention cable, preferably with panel mounting. Then you also need some M3 x 10/12 srews to mount this if it doesnt come with it. - Superglue - If you are printing with SD-card, i would really recomend picking up a Raspberry pi to print with octoprint instead. Since the SD card is not easely accesible. If you want to remove the power supply cover i recomend printing a vented cover for it to avoid accidentaly touching any live components in the power supply. I used this: https://www.thingiverse.com/thing:4495009 The legs i used: https://www.thingiverse.com/thing:2786225 The LCD mount i used: https://www.thingiverse.com/thing:4602730 You can also use this the LCD mount from this mod: https://www.thingiverse.com/thing:4253970 but then you will need longer cables for the LCD (70-80 cm) The spool holder i used: https://www.thingiverse.com/thing:2179768 with this to mount it to the machine: https://www.thingiverse.com/thing:4601705 The cable chains i used: https://www.thingiverse.com/thing:2757810 with this to adapt it to the CR-10 v2: https://www.thingiverse.com/thing:4574563 The LED-holder i used: https://www.thingiverse.com/thing:4563394