CR-10 Smart mount for BTT SKR CR6 Board

prusaprinters

<p>I wanted to be able to mount one of the SKR CR6 boards into my CR-10 Smart without having to cut a hole in the front panel of the printer so that the USB connection can be used.</p><p>The SD card slot can easily be accesed also.</p><p>This was printed with a 50% infill to ensure that it remained rigid along with 5 perimeters.&nbsp;<br><br>4 x M3 x 4.6 x 5.7 Knurled Brass Nut Inserts (M3 x 5 x 5 also work)</p><p>The original screws can be used to mount it to the printer and the same length M3 screws &nbsp;to mount the board. (Only 3 are required to mount the board to the printer.</p><p>The only additional things you need will be:</p><p><a href="https://www.aliexpress.com/item/32950903082.html?spm=a2g0o.order_detail.0.0.24c1f19cKKNq5c">1 x 14 pin 2.54mm Pitch DC3 IDC FC Female To Male Connector</a></p><p><a href="https://www.aliexpress.com/item/32950903082.html?spm=a2g0o.order_detail.0.0.24c1f19cKKNq5c">1 x 16 pin 2.54mm Pitch DC3 IDC FC Female To Male Connector</a></p><p>I thought that 100mm ones would be fine to extend the cables enough, which they are but they do make the wiring a little untidy. I would suggest going for the 200mm or 300mm as they will be able to be tucked away better.</p><p>(I'm running the CR-10 Smart without the bottom panel on as the fan is no longer in the correct position for the best cooling. A link will be added shortly to the new fan mount to take the original fan)</p><p>If you have found this useful please like and possibly leave a comment as well as posting your make.</p>