CR-10 (s) and 2020 frame machines - Angular Filament Guide with PTFE for Top spool holder

thingiverse

Hardware required: - 2x M5 T-Slot Nuts - 2x M5x9 Screws (M3x10 will work if you don't have M3x9 ones but it will scratch the profile) - A piece of PTFE tube - V4 files will benefit of an M3 nut and an M3x12 Screw Changelog: Frame attachment: v4.1: - Hole to make the screw accessible - Print along with Filament feeder v4 v4.0: - Version bump (skipped 3.0) to go along the relative filament feeder version - M3 hole (Screw head goes here, M3x12 screw needed) - Print along with Filament feeder v4 Filament feeder: v4.3: - Wider filament exit hole on the X direction to avoid friction. The lock of the PTFE will happen on the Depth. - Print along with frame attachment v4 v4.2: - Rotated the nut hole, so that printed with the flat base, it won't need to support the hole bridge. - Print along with frame attachment v4 v4.1: - Wider filament hole on the PTFE lock base - Print along with frame attachment v4 v4.0: - M3 hole - M3 nut placement hole - Flat surface to make m3 nut placement easier - Fillet instead of the tilted plane - Print along with frame attachment v4 v3.1: - Added a closed surface on the bottom so the PTFE is secured. - Print the other piece "Filament_Guide_Base_v2" from the original post https://www.thingiverse.com/thing:2785371/files