CR-10 Logitech C270 x-axis belt tensioner mount

thingiverse

Update: I've added a new version with an open camera mount, to allow the camera to be seated deeper. I ran into an issue, while printing a bed level pattern, where my BLTouch would hit the camera. If you don't have a BLTouch, the first version should work fine. If you do, I recommend going with the open-back version. The original mount wouldn't work with my Befenybay x-axis belt-tensioner, so I made some modifications to make it work. I filled in the large hole, adjusted the distance between the small holes, added a groove on the back to accommodate the bearing bolt, knocked out a section to clear the screws that hold the tensioner together, and added some additional support since my mods could have weakened the structure. In Cura, I used normal supports, touching build-plate only, to support the overhang on my cut-out for the tensioner screws. No support is needed for the screw holes or the bearing bolt groove. You could probably print this at a lower resolution and could definitely print it with a lower infill percentage. I just figured it wouldn't add that much time to the print and it's a functional part.