CR-10 FANG W/ BLtouch (Micro Swiss Direct Drive)
prusaprinters
EDIT 2/18/2020 Added wire guide to support clip (v3) If you have already printed this you can either drill a 3mm hole in the original base or just leave it. Seems stable enough without the extra screw Fang mount for Micro Swiss Direct Drive This base is for the micro swiss hot end You will need to print the fan and 40mm fan duct from https://www.thingiverse.com/thing:2763931 I ended up needing t m3 nuts as spacers for the bltouch. I added a washer for good measure. All in all it is performing well x_offset: -40 y_offset: -10 Print Settings Printer Brand: Creality Printer: CR-10S Rafts: Doesn't Matter Supports: No Resolution: .2 Infill: 30% Filament: Overture PETG Orange Category: 3D Printer Parts
With this file you will be able to print CR-10 FANG W/ BLtouch (Micro Swiss Direct Drive) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on CR-10 FANG W/ BLtouch (Micro Swiss Direct Drive).