CR-10 Endstop Auto Leveling Probe
thingiverse
Simple yet effective auto leveling probe for Creality printers. This tool utilizes an endstop equipped with a metal lever removed, requiring prior removal of the stock hotend and part cooling case as it mounts on the left hole. It is compatible with OEM hotends and E3Dv6, also fitting CR-10 High Clearance Fang models. Most likely fits other Creality printers. To probe, push the probe all the way down and execute 'probe/home'. Before initiating a print but after homing the Z axis, push the probe up away from the bed. It is not necessary to heat the nozzle during probing as it will have no effect. I auto-level several times a week using G28; G29; M500; in my start gcode, placing a M420 S1; after G28 and it utilizes stored auto-leveling data. It's crucial: If you forget to lower the probe before homing Z, the printer will run the nozzle into the bed until shutdown. Required parts include: M3x20mm x1 M3x5mm x3 (old fan shroud screws + endstop screws) M3 Nylock x1 Endstop x1 (I used my Z endstop) Wire to extend Z endstop connector
With this file you will be able to print CR-10 Endstop Auto Leveling Probe with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on CR-10 Endstop Auto Leveling Probe.