CR-10 Control Box Base w/120mm fan and feet

thingiverse

This is a remix of the base by tekblub that I wanted to make using a single 120mm exhaust fan to ensure air is being sucked out of the whole space, not just drawn from the other fan. To achieve this, I removed the baseplate and fan from the power supply, and have been very happy with the temperatures inside the box, plus the significant reduction in noise. As for the feet, they should work with any version of this base. I designed them to be used with the original rubber feet from the CR-10 frame that I had removed and switched to squashball feet, but wanted to reuse them. The feet are designed to be glued on to the box after it is attached. There's a small port and space that will let you remove the base screws and access the innards of the control box. The rubber feet are to be attached with an M5 nut (press fit or glued into the slots on the bottom of the feet), and a 10mm M5 screw. Just mirror the foot in your slicer to get the opposite foot.